Price: £8.33 GBP +VAT (£10.00)
The bolts needed when fitting a single mass flywheel to an auto engine or an engine which had a dual mass flywheel. Torque to 69 – 74.5Nm (51 to 55 fl lb).
Zinc flake coated to modern OEM specs.
Note these have a 17 mm hex head, not a 14mm flange head or Torx Plus socket head. This is fine if all 8 fit up against the same flat flywheel face, which they do with most Subaru flywheels. However, some Subaru flywheel have the counterbores for the bolt heads. If yours does, check whether your 17mm socket will fit into the counterbore before ordering these.