Things we have for sale which are (mostly) not related to Subaru powered VW engine conversions:
Items for Sale:
Subaru clutch discs
Tools and Equipment
Non VW and Subaru car parts
Office and IT equipment
Items Wanted:
Subaru clutch discs
Genuine LUK 323029110 Subaru 225mm clutch disc suit non turbo single mass:
Legacy normally aspirated (i.e. non turbo) EJ20, EJ22 and EJ25, all MY90-MY99, some MY00-MY03 (others MY00-03 Legacies have dual mass flywheels)
Impreza normally aspirated (i.e. non turbo) EJ20, EJ25 (USA and Australia only), MY93 – MY07 and some but not all later models
Forester EJ20 normally aspirated (i.e. non turbo) EJ20 MY97 – MY07
New, just missing original packaging. Large quantity available (multiple hundreds). £20 inc VAT each/ £160 inc VAT for 10. £700 inc VAT for 50
Blueprint ADS71119 225mm clutch disc for Subaru Turbo:
Legacy normally aspirated (i.e. non turbo) EJ20, EJ22 and EJ25, all MY90-MY99, some MY00-MY03 (others MY00-03 Legacies have dual mass flywheels)
Impreza normally aspirated (i.e. non turbo) EJ20, EJ25 (USA and Australia only), MY93 – MY07 and some but not all later models
Forester EJ20 normally aspirated (i.e. non turbo) EJ20 MY97 – MY07
New, just missing original packaging. One available £40 inc VAT.
Genuine Exedy FJD013U Subaru 225mm clutch disc suits non turbo single mass:
Legacy normally aspirated (i.e. non turbo) EJ20, EJ22 and EJ25, all MY90-MY99, some MY00-MY03 (others MY00-03 Legacies have dual mass flywheels)
Impreza normally aspirated (i.e. non turbo) EJ20, EJ25 (USA and Australis only), MY93 – MY07 and some but not all later models
Forester EJ20 normally aspirated (i.e. non turbo) EJ20 MY97 – MY07
New, in original packaging. 10 available. £30 inc VAT each, £250 inc VAT for 10
Blueprint ADS73118 230mm clutch disc for Subaru Turbo:
Suits normally turbo 5 speed with single mass flywheels from 240 bhp to 280 bhp. For the turbo pull to release clutches used in 240bhp – 280 bhp 5 speed models.
New, in original packaging. One available. £80 inc VAT
Genuine Exedy FJD024U Subaru 230mm Turbo clutch disc:
Suits normally turbo 5 speed with single mass flywheels from 240 bhp to 280 bhp. For the turbo pull to release clutches used in 240bhp – 280 bhp 5 speed models. This is the disc used in Exedy clutch kit FJK2022
New. No original packaging. One available. £90
Genuine Exedy FJD025U Subaru 225mm Turbo clutch disc:
Suits normally turbo 5 speed with single mass flywheels up to 240 bhp
For the turbo pull to release clutches used in all turbo models up to 240bhp from MY90 – MY01, all 5 speed (but not 6 speed) turbo models from MY02 – MY04. This is the disc used in Exedy clutch kit FJK2007.
New, not in original packaging. 2 available. £60 each inc VAT
Tools and Equipment
INT 50 to INT 40 Adaptor Sleeve:
New. One available. £40 inc VAT
MT5 to MT3 Morse Taper Sleeve, Porta:
New. 2 available. £26 each inc VAT
MT5 Dead Centre, Toolmex:
New, 3 available (2 boxed, one not boxed). £32 each
MT5 to MT2 Morse Taper Sleeve, FPU:
New. 2 available, boxed, one box very tatty. £26 inc VAT each
MT3 to 2 1/8″ Parallel Socket, Jones & Shipman:
New. 4 3/4″ long. One available. £25 inc VAT
MT3 to 2.5″ Parallel Socket, Jones & Shipman:
New, One available, £25 inc VAT
MT2 to 2″ Parallel Socket, Jones & Shipman:
New. One available. £20 inc VAT
MT4 (male) to MT3 (female) Extension:
New. 2 available. £22 inc VAT each
Int30 (M12 drawbar) to MT3 Tool Holder (new):
New. One available. £22 inc VAT
Int30 (M12 drawbar) to MT3 Tool Holder (used):
Used. One available. £18 inc VAT
MT5 to MT4 Morse Taper Sleeve:
New. One available. £26 inc VAT
16mm TG 100 Collet:
New. One available. £6 inc VAT
32mm to 25mm Boring Bar Reducing Sleeve:
New. One available £12 inc VAT
2″ 7tpi BSF Die Not, TWT:
New. One available. £50 inc VAT
32mm Weldon BT40 Endmill Holder:
New. One available. £35 inc VAT
BT40 1″ Collet Chuck (unknown collet spec):
Not great condition. One drive dog slot is damaged, but still usable in manual machines (probably best not to use it in a too changer):
£10 inc VAT
32mm Weldon BT40 Endmill Holder:
Good condition, GEWEFA, one grub screw missing. £22 inc VAT
Colchester lathe cross slide backlash nut set, metric, NOS, for Student Master Mk2
New-old-stock cross slide anti backlash bronze nut halves and steel adjusting wedge, 2.5mm pitch.
Believed to be for a Mk 2 Student or Master model, with the following part numbers (not sure which part no is for which part).
8360-1
8278-1
8283-2
Please check they match the parts in your lathe up front
New, genuine parts. One set available. £75 inc VAT
CCGT 120404.K47P Turning Tool Inserts, SHG
New set of 10. £30
Makita 313075-3 reciprocating saw blade clamp
New genuine Makita spare part, for saw models JR3000,JR3000V,JR3020,JR3030
£7inc VAT
Westbrook AW 4043 1.6mm Aluminium mig wire:
7kg reel of 1.6mm 4043 aluminium mig wire
New, in original packaging. 2 available. £32 inc VAT each
Oerlikon Autofil AlSi5 4043 1.2mm Aluminium mig wire
7kg reel of 1.6mm 4043 aluminium mig wire
In original packaging. 2 available. £32 each inc VAT
Kent Moore KM-6352 Vauxhall / Opel tool, engine mount?’03-’08 Signum / Vectra C:
Vauxhall / Opel tool Used, but in very nice condition. Used to hold the timing pulley in place while changing the water pump, I believe (see https://www.youtube.com/watch?v=G4Whl6ksoE0 ) on the Ecotec engines used in various Vauxhall / Opel / Chevrolet models.
From the above youtube link it sounds like this is the original aftermarket tool for this application, with Sealey 4769 , OTC 6616 and BDS 8240 being copies of it.
In very good condition, it appears to have never been used, although it looks like it has sat around in its box for a long time in a workshop (greasy finger prints on original box, etc).
One available, £30 inc VAT
Secure-a-Bike Racer Plus Xtra Height Thatcham approved Motorcycle storage shed
I bought this used in 2016, planning to use it to house my compressor outside. However, that never happened, and it’s been stored unassembled indoors until now. Made from 2mm thick steel and aluminium chequer plate.
The picture with the bike is not the one I have for sale – it’s from the brochure, but it does show the same model.
There are a few bits of rust showing, mostly inside. The top of the roof looks very rusty in the pics, but the camera exaggerates this – it doesn’t in real life. The only damage is to the floor / base, and was there when I dismantled it with the guy I bought it from. It had clearly been dismantled before, and two of the floor to side bolts must have seized and been cut off with an angle grinder. Very badly, as whoever did it ground into the floor from underneath, as shown in the pics. I can weld this up for the buyer when they collect if required.
These were made by Eurosecure (secure-a-bike.com), who no longer seem to exist. I believe they were fairly unique in that they had Thatcham security approval, which meant that keeping your bike in one could reduce your insurance relative to keeping it outside or in an insecure shed.
Comes with 2 keys ,Thatcham certificate, brochure and assembly instructions.
Used
Model: Racer Plus Xtra Height
External dimensions: L:2440mm, W: 1100mm, H:1600mm at front (slightly lower at the rear),
Door height: 1420mm
Secure-a-Bike from Eurosecure Ltd
The secure-a-bike ensures that your bike has lifelong protection from the weather and the threat of theft. The Secure-a-bike is made according to the latest manufacturing techniques and is produced from only the best quality materials. Parking your bike was never so easy. You simply ride your bike onto the tray and into the wheel clamp, release the brake and simply push your bike into the secure-a-bike garage. Your bike is hidden from prying eyes and is fully protected from the weather and theft. The best in motorcycle security.
To read more about the Secure-a-bike click here… The Range of motorbike garages that can give security, storage and protection to all motorbikes.
The ultimate protection for your motorbike. Secure-a-bike ….. is not to be confused with other cheaper alternatives. Secure-a-bike offers the best in security design and engineering. Designed to give bikers complete peace of mind, engineered to deter the most persistent thief. The corners and edges of the secure-a-bike garage are constructed from 2mm double folded steel to help protect against theft. The lock is a 4 pin, 6 lever deadlock with a pick- proof cylinder made from hardened steel. The hinges are hidden and welded directly to the sides of the secure-a-bike. Panels are easily constructed with all fastenings on the interior of the secure-a-bike garage. The best in motorcycle security.
- Fully tested by Thatcham – the Benchmark Organisation of Security in the UK
- Unique, patented, virtually impregnable
- Unique trolley and wheel clamp for ease of use
- Ultra protection from 6 lever 4 pin deadlock
Known as the ultimate in Motorcycle security, motorcycle protection and motorcycle storage.
Considered, with its Thatcham certificate, to have a Motorcycle lock to deter all Motorcycle theft.
See https://web.archive.org/web/20171214103434/http://www.secure-a-bike.com/producten.html for more details
One available. £1000 inc VAT
Non Subaru and VW car parts
Porsche Boxster Boot Lock Solenoid, NOS 996 624 117 00
Porsche Boxster Boot Lock Solenoid, new old stock, boxed. Porsche part no. 99662411700
One available. £35 inc VAT
Audi / Valeo Starter Motor 077911023K:
Audi / Valeo Starter Motor 077 911 023 K
For BFM, BFL, or BVJ engine
One available. £30. No VAT invoice available for this.
Momo L0231 Porsche 912 1965 – 1969 Steering Wheel Hub / Boss:
Momo catalogues list this as being for a ‘912 S’. but AFAIK, there is no such thing as a 912 S model, As they list hubs for no other 912 models, and the model year range matches, I believe this actually fits any ’65 – ’69 912. Boxed, new, unused, but is has a small dent (looks like it’s been dropped) which doesn’t affect it functionally. The dent is shown below – it’s been coloured in black to make it a lot less noticeable:
One available, £40 No VAT invoice available for this.
This was bought to see whether it could fit my 914, as Momo don’t make a collapsible hub for 914’s. But it can’t (the spline and slip ring fitting are the same as the 914’s, but they’re positioned differently relative to each other). Raid do make a collapsible 914 hub, but theirs also required modification to fit correctly, as the indicator cancelling ‘pin’ was positioned incorrectly relative to the wheel as supplied).
Office and IT equipment
1000 x A6 shipping document wallets:
1000 A6 Clear, Printed Document Wallets
I ordered A6 by mistake when I needed A7, and didn’t realise until too late to return them
£16 inc VAT
Thecus N4510U Pro-R NAS Network Attached Storage Server, no HDD’s
N4510U PRO-R Reliable 4-bay 1U rackmount solution for SMB and SOHO
Intel® Atom™ D2701 Dual-Core Processor (2.13GHz)
2GB DDR3 RAM
Redesigned front panel
HDMI and VGA output
Choice of single or redundant power supply
Six USB ports (including two USB3.0
VMWare ready
iSCSI thin-provisioning supported
Redundant Power Supply (N4510U PRO-R)
For full specs, search ‘N4510 Pro’ here https://www.thecus.com/Download-Center
One available, £130 inc VAT
Items Wanted:
We’re always after these, and will often buy or part exchange them:
Subaru parts
Subaru automatic torque converter drive plate washers:
Part no. 12333AA010, used between the torque converter drive plate and drive plate to crank bolts in all automatic Subaru models with EJ, EG, EZ, FA and FB series engines. We’re always after these used. If you have an automatic Subaru engine which you’re using in a manual VW application, you’ll be removing one of these. Must be flat, but minor corrosion doesn’t matter. They’re worth £5 each to us in average condition (i.e. needing restoration), £10 if immaculate.
Subaru EJ series coolant manifolds:
The following types only (there are many others):
The following types only (there are many others). They’re worth £10 (very bad corrosion or broken bolts or steel pipes) to £50 (near mint condition) each. Typically the ones we buy are £15 – £25 each
Subaru Cruise Control Stalk
Must be this switch body type (the one with the cruise control on / off button in the end), but can be either wiring variant is OK:
83151AG000 black cable sleeve and a white connector
83151AG02A blue cable sleeve, green connector and separate spade terminal (as shown below)
